电气技术  2013, Vol. 14 Issue (11): 25-28    DOI:
研究与开发 |
基于新型调制方法的离并网逆变系统
洪洁1, 李玲2, 杨柳琼3, 杨健4
1.上海追日电气有限公司, 上海 200331;
2.上海城铁建筑科技有限公司, 上海 200033;
3.广西柳州化工股份有限公司, 广西 柳州 545002;
4. 柳州化工控股集团有限公司, 广西 柳州 545002
Inverter System Base on the New Modulation Method
Hong Jie1, Li Ling2, Yang Liuqiong3, Yang Jian4
1.Shanghai Surpass Sun Electric Co., Ltd , Shanghai 200331;
2. Shanghai Technical Citytrain Construction Co., Ltd, Shanghai 20003;
3. Liuzhou Chemical Industry Co., Ltd, Liuzhou, Guangxi 545002;
4. Liuzhou Chemical Industry Group Co., Ltd, Liuzhou 545002
全文: PDF (1252 KB)   HTML (1 KB) 
输出: BibTeX | EndNote (RIS)      
摘要 逆变器的调制方法有单极性调制和双极性调制, 传统单极性调制方法开关损耗小效率高, 但共模干扰比较严重;双极性调制方法开关损耗大效率较低, 但可以抑制共模干扰。文章介绍一种新型的调制方法, 兼具传统单极性和双极性调制方法的优点, 既可以减小共模干扰, 也可以提高逆变器的效率, 基于该新型调制方法开发的逆变器可控制在离网或并网工作状态。文章通过仿真验证了该新型调制方法的优越性和系统的可行性。
服务
把本文推荐给朋友
加入我的书架
加入引用管理器
E-mail Alert
RSS
作者相关文章
洪洁
李玲
杨柳琼
杨健
关键词 单极性调制双极性调制新型调制Boost电路逆变系统    
Abstract:Modulation method of inverter with single polar modulation and double polar modulation, the traditional single polar modulation method is low switching loss, high efficiency, but the common-mode interference is more serious; and the double polar modulation is high switching loss, low efficiency, but can resist common-mode interference. This paper introduce a new modulation method, combines the advantages of the traditional single polar and double polar modulation methods, which not only can reduce the common-mode interference but also improve the efficiency of the inverter; inverter can be controlled the off-grid and on-grid operation status base on the new modulation method. The paper through simulation shows the advantage of modulation method and feasibility of this system.
Key wordssingle polar modulation    double polar modulation    new modulation    boost circuit    inverter system   
收稿日期: 2014-06-26      出版日期: 2014-01-23
作者简介: 洪洁(1987-), 男, 硕士研究生, 工程师, 从事光伏逆变系统的研究与开发。
引用本文:   
洪洁, 李玲, 杨柳琼, 杨健. 基于新型调制方法的离并网逆变系统[J]. 电气技术, 2013, 14(11): 25-28. Hong Jie, Li Ling, Yang Liuqiong, Yang Jian. Inverter System Base on the New Modulation Method. Electrical Engineering, 2013, 14(11): 25-28.
链接本文:  
https://dqjs.cesmedia.cn/CN/Y2013/V14/I11/25