配电网嵌入式IEC 61850智能规约转换网关设计

摘要
图/表
参考文献
相关文章 (15)

全文: PDF (16923 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要针对配电网已有设备普遍不支持IEC 61850的现实情况,设计了支持IEC 61850的转换网关,其硬件采用Freescale的I.mx287微处理器,软件基于嵌入式Linux系统和SISCO的MMS-EASE Lite软件库,支持多种不同通信端口,支持不同设备的同步接入,规约报文采用文件方式,依据不同设备规约类型灵活配置,完成IEC 60870-5,Modbus等系列规约转换。通过客户端软件实现样机对配电网设备的规约转换测试,获取到IEC 61850模型。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	曹军

关键词 ： IEC 61850, I.mx287, IEC 60870-5-101/104, Modbus, 规约转换

Abstract：Aiming at the fact that the existing equipment in distribution network generally does not support IEC 61850, a conversion gateway supporting IEC 61850 is designed. The hardware adopts Freescale I.mx287 microprocessor, and the software is based on embedded Linux system platform and SISCO’s MMS-EASE Lite software library. It supports multiple different communication ports and synchronous access of different devices, and adopts file mode for protocol messages. Flexible configuration according to different equipment specifications, complete IEC 60870-5, Modbus and other series of protocol conversion. Through the client software, the protocol conversion test of the equipment of the distribution network is realized, and the IEC 61850 model is obtained.

Key words： IEC 61850 I.mx287 IEC 60870-5-101/104 Modbus protocol conversion

收稿日期: 2019-04-01 出版日期: 2019-11-19

基金资助:安徽省科技攻关重点项目（1704a0902004）

作者简介: 曹军（1981-）,男,硕士研究生,工程师,研究方向为智能电网通信技术及新能源微电网系统技术。

引用本文:

曹军. 配电网嵌入式IEC 61850智能规约转换网关设计[J]. 电气技术, 2019, 20(11): 62-67. Cao Jun. Design of embedded IEC 61850 intelligent protocol conversion gateway for distribution network. Electrical Engineering, 2019, 20(11): 62-67.

链接本文:

https://dqjs.cesmedia.cn/CN/Y2019/V20/I11/62