电气技术  2014, Vol. 15 Issue (06): 1-4    DOI:
研究与开发 |
带蓄电池储能的静止同步补偿器的小信号模型建立及其控制
梁爽,李宁宁,纪延超,王建赜
哈尔滨工业大学电气工程及自动化学院,哈尔滨 150001
The Small Signal Model of STATCOM with Battery Energy Storage and its Control
Liang Shuang, Li Ningning, Ji Yanchao, Wang Jianze
School of Electrical Engineering and Automation, Harbin Institute of Technology, Harbin 150001
全文: PDF (888 KB)   HTML (0 KB) 
输出: BibTeX | EndNote (RIS)      
摘要 通过DC/DC双向变换器将蓄电池储能接入STATCOM直流侧,直流侧电容将DC/DC侧和STATCOM侧耦合成一整体。通过建立整体的大信号模型的分析,建立了dq坐标系下基于线性解耦的小信号动态模型,实现了DC/DC侧和STATCOM侧的解耦控制。基于该模型,对DC/DC的电流环控制器,以及STATCOM侧电流电压双闭环与功率前馈相结合的控制器设计,实现了对DC/DC侧充放电功率,以及直流侧电容电压稳定输出的控制。并通过Matlab/Simulink仿真验证设计的正确性。
服务
把本文推荐给朋友
加入我的书架
加入引用管理器
E-mail Alert
RSS
作者相关文章
梁爽
李宁宁
纪延超
王建赜
关键词 蓄电池储能DC/DC双向变换器小信号模型解耦控制功率前馈    
Abstract:Battery energy storage is linked to STATCOM dc-link through DC/DC bidirectional converter, DC/DC side and STATCOM side is coupled into a whole by dc-link capacitor. The dq coordinate based on linear decoupling small signal dynamic model is established through analysis of building holistic large signal model, realizing decoupling control of DC/DC side and STATCOM side. Based on this model, DC/DC side charge/discharge power is realized through design of DC/DC current loop controller as well as STATCOM side current-voltage double-loop and power feed-forward term combination controller, realizing DC/DC side charge/discharge power and dc-link capacitor output voltage stability control. Design correctness is validated by Matlab/Simulink simulation and experiment.
Key wordsbattery energy storage    DC/DC bidirectional converter    small signal model    decoupling control    power feed-forward   
     出版日期: 2014-06-11
作者简介: 梁 爽(1991-),女,辽宁大连人,现在哈尔滨工业大学电气工程专业在读硕士研究生。主要研究方向为电力电子在电力系统方向的应用。
引用本文:   
梁爽,李宁宁,纪延超,王建赜. 带蓄电池储能的静止同步补偿器的小信号模型建立及其控制[J]. 电气技术, 2014, 15(06): 1-4. Liang Shuang, Li Ningning, Ji Yanchao, Wang Jianze. The Small Signal Model of STATCOM with Battery Energy Storage and its Control. Electrical Engineering, 2014, 15(06): 1-4.
链接本文:  
https://dqjs.cesmedia.cn/CN/Y2014/V15/I06/1