塔型支柱瓷绝缘子抗震特性分析

Abstract
Figure/Table
References
Related Citation (0)

Download: PDF (1015 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract In view of the difficulty in selecting the type of substation post porcelain insulators in the area of frequent seismic activity, the models of post porcelain insulators with variable-diameter and tower-type are established in this paper. The effects of horizontal seismic force, natural wind load and bending strength on the mechanical properties of post porcelain insulators are analyzed. The total bending moment and the corresponding safety factor of the post porcelain insulator are calculated accurately. The results show that although the wind force has some influence on the structural strength, it is far less than the horizontal seismic force and bending strength. Compared with variable-diameter post porcelain insulators, tower-type post porcelain insulators exhibit higher seismic stability because their center of gravity is closer to the bottom. The results can provide theoretical guidance for the selection of post porcelain insulators in the construction of substations in seismically active areas, thus ensuring the safe and stable operation of power facilities under extreme natural conditions.

Key words： tower-type post porcelain insulators horizontal seismic force total bending moment safety factor

Received: 15 August 2024

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors

Cite this article:

URL:

https://dqjs.cesmedia.cn/EN/Y2024/V25/I12/50

[1] 陈洋. 影响输电线路安全性的因素分析[J]. 电气技术, 2019, 20(增刊1): 90-92, 98.
[2] 李晓红, 刘叙笔, 张杰, 等. 支柱瓷绝缘子断裂临纹尺寸的分析与计算[J]. 高电压技术, 2004, 30(增刊1): 102-103.
[3] 雍军, 沈庆河, 胡晓黎, 等. 浅析山东电网高压支柱瓷绝缘子断裂原因[J]. 高电压技术, 2005, 31(3): 90-91.
[4] 韩晋平, 程郁, 轩刚毅, 等. 220 kV支柱绝缘子断裂原因分析及对策[J]. 高电压技术, 2005(4): 88-89.
[5] 唐剑彬, 林瑞全. 一种基于力学分析的覆冰厚度计算方法[J]. 电气技术, 2020, 21(4): 20-24.
[6] 蒋兴良, 邹佳玉, 韩兴波, 等. 自然环境绝缘子长串覆冰直流闪络特性[J]. 电工技术学报, 2020, 35(12): 2662-2671.
[7] 吕玉坤, 宋庆壮, 王召鹏, 等. 低风速环境下XSP— 160型瓷三伞绝缘子积污特性数值模拟[J]. 电工技术学报, 2020, 35(10): 2257-2265.
[8] 李泳霖, 黄世龙, 刘云鹏, 等. 考虑湿度气压影响的瓷绝缘子沿面类辉光放电仿真及其紫外光谱特性分析[J]. 电工技术学报, 2023, 38(7): 1956-1969.
[9] 吴旭涛, 危鹏. 一起220kV隔离开关支柱瓷绝缘子断裂事故的原因分析[J]. 电瓷避雷器, 2011(6): 11-14.
[10] 李歆蔚, 黄杨珏, 谭令其. 支柱绝缘子对交流滤波器断路器电场分布的影响研究[J]. 电气技术, 2021, 22(8): 73-77, 84.
[11] ZHANG Enwen, YANG Yunbo, SONG Wei, et al.Study on bending and twisting mechanical properties of high voltage porcelain post insulator[J]. Applied Mechanics and Materials, 2014, 521: 334-338.
[12] 杨海涛, 陈庆涛, 丁国成, 等. 高压支柱瓷绝缘子力学特性分析及断裂机理研究[J]. 电瓷避雷器, 2017(4): 178-183.
[13] 孟繁萃, 张达, 张明. 自然风力对绝缘子结构的影响[J]. 机械与电子, 2019, 37(1): 3-6, 14.
[14] 刘运政, 邹德仕, 郭成久. 塔型支柱瓷绝缘件重心研究[J]. 电工技术, 2022(23): 256-258.
[15] 李喆, 扬帆, 邓颖海. GW4-220kV高压隔离开关棒形支柱瓷绝缘子静力学特性研究及其优化[J]. 电瓷避雷器, 2016(1): 1-6.
[16] 刘学军. 风载荷下支柱瓷绝缘子的弯曲应力计算[J].电瓷避雷器, 2018(5): 178-184.