|
|
|
| The Method of Power Pulse Driving and Technology Research of Space Electric Power Fetching |
| Yang Lixin, Hou Kenan |
| Beijing Smart Chip Microelectronics Co., Ltd, Beijing 102200 |
|
|
|
|
Abstract This paper proposes a method of power pulse drive,power pulse generator technology implementation,and space fetching technology. The voltage of the electric power is obtained from the high voltage transmission line by using the bipolar plate electric field induction. A capacitor is formed by erecting two plates parallel to the earth between the high-voltage line and the earth. The high voltage electric field between the high-voltage wire and the earth will cause a voltage difference between the poles of the capacitor, and this voltage difference is the driving voltage of the power pulse. The driving AC voltage is converted into DC by rectification, and the DC power is stored and output. The DC signal could control the MOSFET conduction and the shutdown, the output of DC power is converted to the power pulse signal. The signal causes the transistor to have two safe breakdown. Finally, the output pulse signal can drive the load.
|
|
Published: 22 March 2016
|
|
|
|
| Cite this article: |
|
Yang Lixin,Hou Kenan. The Method of Power Pulse Driving and Technology Research of Space Electric Power Fetching[J]. Electrical Engineering, 2016, 17(3): 27-29.
|
|
|
|
| URL: |
|
http://dqjs.cesmedia.cn/EN/Y2016/V17/I3/27
|
[1] 杨建光. 半导体三极管的损坏机理浅析[J]. 胜利油田师范专科学校学报, 2003, 17(4): 32-35.
[2] 宋钦岐. 集成电路的电磁脉冲损伤阈值与统计分布研究[R]. 北京: 中国国防科学技术报告, 1991: 2-4.
[3] 刘忠山, 杨勇, 马红梅, 等. 超快速高压雪崩三极管器件研制[J]. 微纳电子技术, 2009, 46(6): 379-382.
[4] 王远. 模拟电子技术[M]. 北京: 北京理工大学出版社, 1991: 30-38.
[5] 彭军. 晶体管电路设计[M]. 北京: 科学出版社, 2004: 58-72.
[6] 陈汝全. 电子技术常用器件应用手册[M]. 北京: 北京理工大学出版社, 1991: 97-110.
[7] 张晶. 智能电网200问[M]. 北京: 中国电力出版社, 2012: 61-123.
[8] 吕强王, 金全, 徐晔. 电容滤波不可控整流电路器件故障诊断[C]//贵州: 2011年中国电机工程学会年会, 2011.
[9] 李永强, 周勇. 无源滤波电容器参数选择方法[J]. 电力自动化设备, 2009, 29(7): 93-96.
[10] 苏开云, 姚斯立. 脉冲电容器研制及电容器塔的结构设计[J]. 电力电容器, 2006, 2(6): 19-22.
[11] HOCHENG H, HUANG, et al. Comprehensive review of end point detection in chemical mechanical planari- zation of submicron integrated circuits manufac- turing[J]. International Journal of Materials and Product Technology, 2003, 8(4): 469-486.
[12] YU C. Chemical mechanical polishing of Copper for advanced semiconductor device fabrication[J]. Future Fab Intl, 2001, 7(10): 13-17.
[13] WHITE D A. Multivariate analysis of spectral measurements for the charcterization of semiconductor processes [N]. Massachusetts Institute of Technology, 2001(3).
[14] BLACK H M. Using software to generate electric energy pulse[J]. Electric Power Automation Equipment, 2006, 8(4): 320-323. |
|
|
|
2016, Vol. 17 
