|
|
|
| Research and Manufacture of Location Installation System for Outdoor High Voltage Disconnector’s Operation Mechanism |
| Zhang Zhifu, Pan Xiang, Chen Hengsong, Hong Yunfeng, Huang Xianlong |
| Wuhu Power Supply Company, Wuhu, Anhui 241000 |
|
|
|
|
Abstract The paper describes the research and manufacture progress of a special system for the high voltage disconnector,which based on plinth method that proposed in this paper, and a location installation system have been manufactured at last. The experimental results demonstrate that plinth method is feasible. With the system, the worker could overcome the problem for mechanism accurate location during disconnector installation and enhance work efficiency and safety level at the same time.
|
|
Published: 20 April 2016
|
|
|
|
| Cite this article: |
|
Zhang Zhifu,Pan Xiang,Chen Hengsong等. Research and Manufacture of Location Installation System for Outdoor High Voltage Disconnector’s Operation Mechanism[J]. Electrical Engineering, 2016, 17(4): 136-138.
|
|
|
|
| URL: |
|
http://dqjs.cesmedia.cn/EN/Y2016/V17/I4/136
|
[1] Q/CSG 11105.2—2008. 南方电网工程施工工艺控制规范[S].
[2] GBJ 147—1990. 电气装置安装工程 高压电器施工及验收规范[S].
[3] 孙宁. 户外高压隔离开关电动机构箱安装专用工具研制[J]. 高压电器, 2011, 47(7): 76-79.
[4] 盛明学, 王志清. 户外高压隔离开关常见故障的原因分析与处理[J]. 高压电器, 2010, 46(10): 93-96.
[5] 陈显辉, 雷欢. 大型隔离开关操作机构安装平台的研制[J]. 机电信息, 2013(27): 132-133.
[6] 魏忠明, 尹志. 隔离开关操作平台找正的施工方法比较[J]. 云南电力技术, 2006, 34(2): 50-51. |
|
|
|
2016, Vol. 17 
