|
|
|
| A transient fault diagnosis scheme for relay protection multiplex channel |
| Luo Yihui1, Wang Rongchao1, Tan Hao2, Xu Xiaochun2, Zhao Qingchun2 |
1. China Southern Power Grid EHV Transmission Company Liuzhou Bureau,Liuzhou,Guangxi 545006;
2. NR Electric Co.,Ltd,Nanjing 210000 |
|
|
|
|
Abstract The structure of the line protection multiplex channel is complicated, and the traditional method of locating the channel fault point is time/labor consumptive. In this paper the abnomal judging mechanism of the multiplex channel equipments is studied firstly, the difference in equipment response when the channel fails is analyzed, then the corresponding channel diagnostic byte and its transmission mechanism is designed, multiplex channel fault location is achieved. Considering the actual operation and maintenance situation, a channel fault recording scheme is further proposed, fault recording is triggered when channel diagnostic byte changes, and the information related to channel status before and after the trigger is recorded and a file is generated. Through high-speed acquisition and large-capacity storage hardware solution, even multiple transient failures occur in a short period of time, information can also be completely recorded, at the same time, intermediate node information file and its display software scheme is designed to facilitate the operator to view the relevant informations. Channel diagnosis-related information is modeled according to standardization and can be easily transmitted to the remote monitoring equipment for diagnosis. Experiment shows that the scheme proposed in this paper has a good effect in quickly channel fault diagnosis, does not affect the original function of protection, and has the value of promotion.
|
|
Received: 15 April 2020
|
|
|
|
| Cite this article: |
|
Luo Yihui,Wang Rongchao,Tan Hao等. A transient fault diagnosis scheme for relay protection multiplex channel[J]. Electrical Engineering, 2020, 21(11): 87-91.
|
|
|
|
| URL: |
|
http://dqjs.cesmedia.cn/EN/Y2020/V21/I11/87
|
[1] 张鸿飞,陈琳灿,康权,等.光纤差动保护的通道选择及应用探讨[J].浙江电力,2010,29(7):17-19.
[2] 何霞,应伟刚.光纤保护通道检查与联调方法[J].电力系统保护与控制,2010,38(18):190-192.
[3] 陈强林,李瑞生,马全霞,等.继电保护通道检测平台在光纤差动保护测试中的应用[J].电力系统保护与控制,2009,37(8):83-85,92.
[4] 陈志勇.继电保护光纤通道异常快速诊断处理研究[J].电气技术,2018,19(2):109-111,115.
[5] 吴志宇.超高压线路光纤保护通道故障分析及定位方法[J].电气技术,2013,14(9):66-68.
[6] 崇志强,戴志辉,焦彦军.典型广域保护通信网络的信息传输可靠性评估[J].电力系统及其自动化学报,2014,28(4):20-24.
[7] 俞斌,王同文,张理,等.光纤保护通道可靠性研究[J].东北电力技术,2018,39(11):19-23.
[8] 李响,李彦,刘革明.光纤纵联保护通道故障在线诊断方法[J].电力系统保护与控制,2016(2):147-150.
[9] 李彦,王芊.基于C37.94协议的纵差保护复用通道故障诊断方法[J].电工文摘,2011(4):29-30.
[10] 蔡菠,谈浩,李彦,等.一种线路保护复用通道故障自诊断机制[J].电力工程技术,2017,36(6):73-77.
[11] GB/T 16712—2008.同步数字体系(SDH)设备功能块特性[S].
[12] 顾友美.SDH通信网故障处理方法[J].江苏电机工程,2006,25(6):14-16.
[13] GB/T 14598.24—2017.量度继电器和保护装置第24部分:电力系统暂态数据交换(COMTRADE)通用格式[S]. |
|
|
|
2020, Vol. 21 
