|
|
|
| Effective Methods of Reducing the Cogging Torque of the Flux Reversal Machine |
| Shi Youji |
| Tieling Teachers College, Tieling, Liaoning 112000 |
|
|
|
|
Abstract The cogging torque of the magnetic flux reversal machine is relatively large because of its inherent structure. In this paper, extant methods of weakening the cogging torque will be analyzed and summarized on the basis of the analyses of its generating principles and its calculating methods, finally several efficient methods for reducing the cogging torque will be found out for purpose of the practical application and the further study of this technology.
|
|
Published: 10 October 2013
|
|
|
|
[1] KIM T H, LEE J. A Study of the Design for the fluxreversal machine[J]. IEEE Transactions on Magnetics,2004, 40(4): 2053-2055.
[2] KIM Y S, KIM T H, KIM Y T, et al. Various design techniques to reduce cogging torque in flux-reversal machines[C]. The Eighth International Conference on Electrical Machines and Systems, September 27-29, 2005,Nanjing, China, 2005, 1: 258-260.
[3] 沈勇环,陈益广,赵维友.削弱反磁通电机齿槽转矩的两种新方法[J].电工技术学报, 2007, 22(7): 141-144.
[4] 郭亮,卢瑟芬,叶云岳,李光友.基于有限元方法的磁通反向电机定位转矩研究[J].电工电能新技术,2006,25(2).
[5] 赵维友.磁通反向式电机齿槽转矩削弱方法的研究[D].天津大学硕士学位论文,2007.1.
[6] 寻志伟.磁通反向电机齿槽转矩的削弱及其对电磁转矩影响[D].天津大学硕士学位论文,2007.5.
[7] 赵振卫.磁通反向永磁电机的研究[D].山东大学硕士学位论文,2010.10.
[8] 朱晗.磁通反向电动机的设计与分析[D].山东大学硕士学位论文,2011.5.
[9] 汪旭东, 许孝卓, 封海潮.永磁电机齿槽转矩综合抑制方法研究现状及展望[J].微电机,2009(12).
[10] 余海阔,陈世元,彭海涛.双凸极永磁电机齿槽转矩的几种削弱方法[J].微电机,2011(1). |
|
|
|
2013, Vol. 14 
