|
|
|
| Application of measurement uncertainty in field inspection of electric energy meter |
| ZHOU Yaqun, ZHANG Gang, ZHANG Chunxiang, LIU Huan, WANG Zhihao |
| Xi'an Thermal Power Research Institute Co., Ltd, Xi'an 710054 |
|
|
|
|
Abstract In order to accurately evaluate the electric energy meter measurement error in real load test, according to the electric energy meter working principle and the measurement uncertainty evaluation, this paper analyzes the influence of uncertainty of direct measurement and clamp measurement on the error of electric energy meter field inspection. Through the analysis of the electric energy meter field test cases based on the direct measurement method and the clamp meter method, the following conclusions are drawn. The error of electric energy meter for class 0.5(S) and above field inspection does not need to consider the influence of measurement uncertainty because the expanded uncertainty is less than 1/3 of the maximum allowable error in direct measurement. When the error measured with clamp, the error of the meter should be considered because the expanded uncertainty is greater than 1/3 of the maximum allowable error.
|
|
Received: 11 May 2021
|
|
|
|
| Cite this article: |
|
ZHOU Yaqun,ZHANG Gang,ZHANG Chunxiang等. Application of measurement uncertainty in field inspection of electric energy meter[J]. Electrical Engineering, 2021, 22(11): 80-83.
|
|
|
|
| URL: |
|
http://dqjs.cesmedia.cn/EN/Y2021/V22/I11/80
|
[1] 林伟斌, 陈垒, 肖勇, 等. 电能表现场校验技术研发应用现状及其发展趋势(下)[J]. 电测与仪表, 2016, 53(13): 1-4, 9.
[2] 王海涛, 胡元璐. 基于用电信息采集系统的电能表失压断相后电量追补的分析[J]. 电气技术, 2017, 18(8): 56-58, 64.
[3] Measuring instruments directive: ECDirective 2004/ 22/EC[S]. 2004.
[4] 电能计量装置技术管理规程: DL/T 448—2016[S]. 北京: 中国电力出版社, 2017.
[5] 测量不确定度评定与表示: JJF 1059.1—2012[S]. 北京: 中国质检出版社, 2013.
[6] 覃明宏. 工频频率表测量不确定度分析与校准测量能力评定[J]. 电气技术, 2009, 10(10): 5-7, 26.
[7] 刘青, 王晨东, 李湛宇, 等. 埋地管道HEMP响应的不确定度量化[J]. 电工技术学报, 2019, 34(9): 1789-1797.
[8] 吕强. 测量仪器示值误差的符合性评定[J]. 计量与测试技术, 2013, 40(2): 29-31.
[9] 余学锋, 张健, 石瑞丰. 一种新的符合性评定方法设计与分析[J]. 计量与测试技术, 2021, 48(2): 94-98.
[10] THEODOROU D, ZANNIKOS F.The use of mea-surement uncertainty and precision data in conformity assessment of automotive fuel products[J]. Measurement, 2014(15): 141-151. |
|
|
|
2021, Vol. 22 
