|
|
|
| New Technology of Inverter Power Supply Based on Bridge Arm Rotation Method |
| Wang Cong, Wang Rongsheng |
| School of Electrical Engineering and Automation, Fuzhou University, Fuzhou 350108 |
|
|
|
|
Abstract Introducing the working principle of the new technology of PWM single polarity bridge arm rotation method. Design a kind of low cost, high precision of the single-phase full-bridge inverter. Based on single polarity sine pulse width modulation to achieve the new technology of PWM of bridge arm rotation method, and implemented software algorithms by a digital signal processor (DSP) software algorithms. The experimental results show that the design can effectively use dc inverter for alternating current (ac), and to ensure the stability of the output voltage waveform, to achieve good effect.
|
|
Published: 25 March 2014
|
|
|
|
| Cite this article: |
|
Wang Cong,Wang Rongsheng. New Technology of Inverter Power Supply Based on Bridge Arm Rotation Method[J]. Electrical Engineering, 2014, 15(03): 60-62.
|
|
|
|
| URL: |
|
http://dqjs.cesmedia.cn/EN/Y2014/V15/I03/60
|
1 [] 赵青. 一种基于单极性SPWM控制的正弦波逆变器的研究[D].浙江大学,2004.
2 ] 陈坚,康勇. 电力电子学电力电子变换和控制技术[M]. 北京:高等教育出版社, 2011.6.
[3] 杨春华.正弦波逆变电源的研究与设计[D].东华大学,2009.[3] ] 王晓明. 电动机的DSP控制 TI公司DSP应用[M].
4 北京:北京航空航天大学出版社, 2009.9.
5 ] 刘和平,等. DSP原理及电机控制应用基于TMS320LF240x系列[M].北京: 北京航空航天大学出版社 , 2006.
6 陈桂玉,黄灿水,李东旭,汤宁平. 基于DSP 的中频发电机逆变单相工频电源设计 [J]. 电工电气,2010(11):18-20,24. |
|
|
|
2014, Vol. 15 
