基于宽频测量数据和电压振幅比的强迫振荡源定位

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (1894 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract Modern power systems may experience untypical forced wideband oscillations, and traditional methods are difficult to identify the source of such forced oscillations. This paper proposes a universal identification method for forced oscillation sources based on voltage oscillation ratio (VOR), using wide-frequency measurement data provided by the broadband measurement system. The VOR is the ratio of the oscillation voltage amplitude relative to the steady-state voltage amplitude, which can effectively reflect the physical characteristics that the forced oscillation source has the maximum relative amplitude of oscillation voltage. This method is suitable for identification of low-frequency oscillation and sub/super-synchronous oscillation. This method is applicable in different voltage levels and can reduce the impact of measurement errors of transformers and broadband measurement devices. The effectiveness of this proposed method is verified through simulation cases and on-site cases.

Key words： power system forced oscillation oscillation source identification wide-frequency measurement voltage oscillation ratio (VOR)

Received: 19 September 2024

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	CHEN Yulin
	ZHANG Jie
	YANG Limin
	WANG Kun

Cite this article:

CHEN Yulin,ZHANG Jie,YANG Limin等. Forced oscillation source identification based on wide-frequency measurement and voltage oscillation ratio[J]. Electrical Engineering, 2025, 26(3): 53-58.

URL:

https://dqjs.cesmedia.cn/EN/Y2025/V26/I3/53

[1] 马宁宁, 谢小荣, 贺静波, 等. 高比例新能源和电力电子设备电力系统的宽频振荡研究综述[J].中国电机工程学报, 2020, 40(15): 4720-4732.
[2] 王铁强, 贺仁睦, 王卫国, 等. 电力系统低频振荡机理的研究[J].中国电机工程学报, 2002, 22(2): 22-26.
[3] 张剑云, 李明节, 周济, 等. 三峡巨型电站异常功率波动仿真与试验研究[J].中国电机工程学报, 2012, 32(16): 122-129.
[4] 刘辉, 杨寅平, 田云峰, 等. 电力系统强迫功率振荡实例及机理分析[J].电力系统自动化, 2012, 36(10): 113-117.
[5] 张路, 陈军, 赵启, 等. 新疆电网次同步振荡控制系统及其测试方法研究[J].电气技术, 2022, 23(12): 31-37.
[6] 王志华, 郑涛, 窦仁辉, 等. 电力系统宽频测量技术方案与展望[J].电力自动化设备, 2023, 43(11): 218-224.
[7] 张放, 李佳欣, 史静舒. 基于基波同步相量的次/超同步振荡参数辨识探究: 频谱特性和关键问题[J].电工技术学报, 2024, 39(19): 6018-6038.
[8] 徐衍会, 成蕴丹, 刘慧, 等. 基于瞬时功率的次同步振荡频率提取及振荡源识别方法[J].电工技术学报, 2023, 38(11): 2894-2907.
[9] 董清, 王莹. 发电厂内强迫共振型低频振荡源的定位方法[J].电力自动化设备, 2017, 37(7): 110-114, 129.
[10] 蒋平, 郑斌青, 冯双. 基于功率及频率波动相位的强迫扰动源定位[J].电力自动化设备, 2017, 37(1): 112-117.
[11] 王茂海, 孙昊. 强迫功率振荡源的在线定位分析技术[J].中国电机工程学报, 2014, 34(34): 6209-6215.
[12] 肖仕武, 徐立光. 基于频率耦合阻抗的直驱风电机组次同步振荡关键影响因素分析及抑制措施[J].电网技术, 2023, 47(4): 1641-1652.
[13] 余一平, 闵勇, 陈磊, 等. 基于能量函数的强迫功率振荡扰动源定位[J].电力系统自动化, 2010, 34(5): 1-6.
[14] 陈磊, 陈亦平, 闵勇, 等. 基于振荡能量的低频振荡分析与振荡源定位(二)振荡源定位方法与算例[J].电力系统自动化, 2012, 36(4): 1-5.
[15] 姜涛, 高浛, 李雪, 等. 电力系统强迫振荡源定位的耗散能量谱方法[J].中国电机工程学报, 2023, 43(8): 2940-2952.
[16] 李颖, 沈沉, 刘锋. 基于Hamilton实现的电力系统振荡源设备级定位[J].电力系统自动化, 2012, 36(23): 6-11, 86.
[17] 陈磊, 王文婕, 王茂海, 等. 利用暂态能量流的次同步强迫振荡扰动源定位及阻尼评估[J].电力系统自动化, 2016, 40(19): 1-8.