电气技术  2016, Vol. 17 Issue (11): 53-55    DOI:
研究与开发 |
基于DSP的单相有源电力滤波器的研究与设计
邵贺锋1, 全惠敏2
1. 中国建筑西南设计研究院有限公司,成都 610041;
2. 湖南大学电气与信息工程学院,长沙 410082
Research and Design on a Single-phase Active Power Filter based on DSP
Shao Hefeng1, Quan Huimin2
1. China Southwest Architectural Design and Research Institute Co., Ltd, Chengdu 610041;
2. College of Electrical and Information Engineering, Hu’nan University, Changsha 410082
全文: PDF (3620 KB)   HTML (1 KB) 
输出: BibTeX | EndNote (RIS)      
摘要 首先介绍了单相有源电力滤波器的基本原理与系统结构,然后阐述了基于鉴相原理的谐波检测方法与系统总体的控制策略。针对有源电力滤波器高速,精确的要求,利用高速浮点数字信号处理芯片TMS320F28335作为主控器,设计了一套全新的单相有源电力滤波器,文中给出具体的硬件设计和软件流程。最后,通过实验表明,本文所设计的系统正确性和有效性。
服务
把本文推荐给朋友
加入我的书架
加入引用管理器
E-mail Alert
RSS
作者相关文章
邵贺锋
全惠敏
关键词 有源电力滤波器谐波检测控制策略硬件设计    
Abstract:Firstly, the basic principle of single-phase active power filter is introduced. Then It analyzes the harmonic detection method based phase distinguishing technology and the control strategy of system. Aiming at the high speed and precision requirements of the active power filter, a new single-phase active power filter is designed by using the high speed floating point digital signal processing chip TMS320F28335. Specific hardware design and software flow are given in this paper. Finally, experiments show that the design of the system is correct and effective.
Key wordsactive power filter    harmonic detection    control strategy    hardware design   
     出版日期: 2016-11-24
作者简介: 邵贺锋(1989-),男,甘肃省秦安人,助理工程师,从事电网谐波补偿、电能质量控制研究的工作。
引用本文:   
邵贺锋, 全惠敏. 基于DSP的单相有源电力滤波器的研究与设计[J]. 电气技术, 2016, 17(11): 53-55. Shao Hefeng, Quan Huimin. Research and Design on a Single-phase Active Power Filter based on DSP. Electrical Engineering, 2016, 17(11): 53-55.
链接本文:  
https://dqjs.cesmedia.cn/CN/Y2016/V17/I11/53