电气技术  2020, Vol. 21 Issue (11): 7-12    DOI:
研究与开发 |
一种参数化电池模拟器模型及参数辨识方法
傅祎飏, 李锐华, 胡波, 胡浩
同济大学电气工程系,上海 201804
A parameterized battery model for battery emulator and parameter identification method
Fu Yiyang, Li Ruihua, Hu Bo, Hu Hao
Electrical Engineering of Tongji University,Shanghai 201804
全文: PDF (20823 KB)   HTML (1 KB) 
输出: BibTeX | EndNote (RIS)      
摘要 在电驱动系统测试实验中使用真实电池存在实验成本高、实验周期长以及难以适应极端测试工况等问题,因此采用电池模拟器替代真实电池已成为电驱动系统测试技术发展的重要趋势。建立参数化电池模型一直是制约电池模拟器发展的主要原因之一。本文提出一种参数化电池模拟器模型及参数辨识方法,在此基础上,获取电池模型参数与电池外部电气端口特性之间的关系,能够为电池模拟器电力电子装置的设计提供重要的参考依据。实验结果表明,本文提出的锂离子电池模型能够准确反映电池工作特性,对于电池模拟器的设计具有重要意义。
服务
把本文推荐给朋友
加入我的书架
加入引用管理器
E-mail Alert
RSS
作者相关文章
傅祎飏
李锐华
胡波
胡浩
关键词 电池模拟器锂离子电池电池模型参数辨识    
Abstract:Using real battery in the test of electric drive system has many disadvantages, such as high test cost, long test cycle, and difficulty in adapting to extreme operating conditions. Therefore, using battery emulator to replace real battery has become an important trend in the development of electric drive system test. Establishing a parameterized battery model has always been a problem restricting the development of battery emulator. This paper proposes a parameterized battery model for battery emulator and parameter identification method. On this basis, the relationship between the parameters of the battery model and the I-V characteristics of the battery can provide an important reference for the design of the power electronic device of the battery emulator. The experimental results show that the lithium-ion battery model proposed in this paper can accurately reflect the working characteristics of the battery, which is of great significance for the design of the battery emulator.
Key wordsbattery emulator    lithium-ion battery    battery model    parameter identification   
收稿日期: 2020-04-30     
作者简介: 傅祎飏(1993-),男,上海市人,硕士研究生,主要研究方向为电力电子技术。
引用本文:   
傅祎飏, 李锐华, 胡波, 胡浩. 一种参数化电池模拟器模型及参数辨识方法[J]. 电气技术, 2020, 21(11): 7-12. Fu Yiyang, Li Ruihua, Hu Bo, Hu Hao. A parameterized battery model for battery emulator and parameter identification method. Electrical Engineering, 2020, 21(11): 7-12.
链接本文:  
https://dqjs.cesmedia.cn/CN/Y2020/V21/I11/7